Call Now 03 5523 6968
-
sales@pcengines.com.au
Log In
Port city engines
$0.00 0

Cart

No products in the cart.

Our Ford Custom crate engines are all designed with the best combination of power and reliability in mind to suit HP-Street, Oval track speedway racing, Circuit racing, Drag racing, and Marine sport. “What you get” with your Custom Crate Engine is a precision machined, blueprinted and balanced engine using the best components for the level that your engine is designed for, no short cuts, no exceptions. Only available from Port City Engines...
All complete long motors are run-in and tested on our Superflow SF-902 engine dyno before delivery for your complete satisfaction. (Dyno results included)

Ford 347 Windsor

HP-1 Performer Series

Base Long Engine

Ford 347 Windsor engine - 10.2:1-C/R

The Ford 347 Windsor HP1 Long engine includes a fully machined, blueprinted & balanced long motor, including HP heads with over size valves and pocket ported.

Including: New standard volume oil pump & oil filter.

Dyno’d, Run-in and ready to install!
Cubic Inch
347 ci
Bore & Stroke
4.030″ – 3.400″
Horsepower
414 hp @ 5800rpm
Torque
418 ft/lbs @ 4500rpm
Recommended Fuel
95+ premium unleaded
$13295
F347WHP1-LM
Pricing does not include engine core cost
(change over required)
Show Less Show More
Block:Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft:New Scat 9000 series crankshaft, balanced and linished.
Con-rods:New Scat I-Beam conrods, balanced.
Heads:Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.
Pistons:Hypereutectic pistons.
Rings:Hastings or Sealed Power moly rings.
Bearings:ACL, King or Clevite bearings.
Gaskets:Fel-Pro gaskets.
Camshaft:Crow Cams 15603 camshaft.
Lifters:Hydraulic flat tappet.
Valve Springs:Crow Cams performance springs.
Valve Train:New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set:Crow double row roller chain with new cnc gears.
Oil Pump:New standard volume oil pump.
Balancer:Nuline/Powerbond balancer.
Fasteners:ARP rod bolts & standard fasteners .
Core Plugs:Brass.
Oil:K&N Z9 oil filter, Tritech Lubricants running in oil.
Rocker Covers:New chrome rocker covers.

Base Ready to Run Engine

Ford 347 Windsor engine - 10.2:1-C/R

The Ford 347 Windsor HP1 Ready2Run engine includes a fully machined, blueprinted & balanced long motor, including HP heads with over size valves and pocket ported.

Including: Aeroflow Oil pan, New standard volume oil pump, Edelbrock performer manifold & Air Filter, Holley Brawler 600 carby, Ice Ignitions distributor, ignition control box, coil & spark plug leads, Chrome rocker covers, oil cap & breather and a oil filter.

Dyno’d, Run-in and ready to install!
Cubic Inch
347 ci
Bore & Stroke
4.030″ – 3.400″
Horsepower
414 hp @ 5800rpm
Torque
418 ft/lbs @ 4500rpm
Recommended Fuel
95+ premium unleaded
$16950
F347WHP1-R2R
Pricing does not include engine core cost
(change over required)
Show Less Show More
Block:Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft:New Scat 9000 series crankshaft, balanced and linished.
Con-rods:New Scat I-Beam conrods, balanced.
Heads:Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.
Pistons:Hypereutectic pistons.
Rings:Hastings or Sealed Power moly rings.
Bearings:ACL, King or Clevite bearings.
Gaskets:Fel-Pro gaskets.
Camshaft:Crow Cams 15603 camshaft.
Lifters:Hydraulic flat tappet.
Valve Springs:Crow Cams performance springs.
Valve Train:New lifters, valve springs, retainers, collets, valve seals, pushrods & timing set.
Timing Set:Crow double row roller chain with new cnc gears.
Oil Pump:New standard volume oil pump.
Balancer:Nuline/Powerbond balancer.
Fasteners:ARP rod bolts & standard fasteners .
Core Plugs:Brass.
Ignition:Autolite Spark Plugs, Ice Ignitions distributor, ignition control box, coil & spark plug leads.
Intake:Edelbrock Performer manifold, Edelbrock chrome air filter & Holley Brawler 600cfm carb.
Cooling:GMB brand water pump with cast impellor.
Oil:K&N Z9 oil filter, Tritech Lubricants running in oil.
Rocker Covers:New chrome rocker covers.

Base Sub Engine

Ford 347 Windsor engine

The Ford 347 Windsor HP1 Sub engine includes a fully machined, blueprinted & balanced sub motor.

Including: Camshaft, Lifters, Timing cover, multi keyway timing set, New standard volume oil pump, oil filter.
Cubic Inch
347 ci
Bore & Stroke
4.030″ – 3.400″
Horsepower
414 hp @ 5800rpm
Torque
418 ft/lbs @ 4500rpm
Recommended Fuel
95+ premium unleaded
$6795
F347WHP1-SUB
Pricing does not include engine core cost
(change over required)
Show Less Show More
Block:Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft:New Scat 9000 series crankshaft, balanced and linished.
Con-rods:New Scat I-Beam conrods, balanced.
Pistons:Hypereutectic pistons.
Rings:Hastings or Sealed Power moly rings.
Bearings:ACL, King or Clevite bearings.
Gaskets:Fel-Pro gaskets.
Camshaft:Crow Cams 15603 camshaft.
Lifters:Hydraulic flat tappet.
Valve Train:New lifters & timing set.
Timing Set:Crow double row roller chain with new cnc gears.
Oil Pump:New standard volume oil pump.
Balancer:Nuline/Powerbond balancer.
Fasteners:ARP rod bolts & standard fasteners .
Core Plugs:Brass.

Base Short Engine

Ford 347 Windsor engine

The Ford 347 Windsor HP1 short engine includes a fully machined, blueprinted & balanced short motor.

Including: fully machined block with crankshaft, pistons & rods.
Cubic Inch
347 ci
Bore & Stroke
4.030″ – 3.400″
Horsepower
414 hp @ 5800rpm
Torque
418 ft/lbs @ 4500rpm
Recommended Fuel
95+ premium unleaded
$4850
F347WHP1-SM
Pricing does not include engine core cost
(change over required)
Show Less Show More
Block:Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft:New Scat 9000 series crankshaft, balanced and linished.
Con-rods:New Scat I-Beam conrods, balanced.
Pistons:Hypereutectic pistons.
Rings:Hastings or Sealed Power moly rings.
Bearings:ACL, King or Clevite bearings.
Fasteners:ARP rod bolts & standard fasteners .
Core Plugs:Brass.

Base Engine Kit

Ford 347 Windsor engine

The Ford 347 Windsor HP1 engine kit includes a fully machined, blueprinted, & balanced un-assembled short block kit.

Including: Pistons, rings, bearings, gaskets, Scat rods & crankshaft.
Cubic Inch
347 ci
Bore & Stroke
4.030″ – 3.400″
Horsepower
414 hp @ 5800rpm
Torque
418 ft/lbs @ 4500rpm
Recommended Fuel
95+ premium unleaded
$3995
F347WHP1-SK
Pricing does not include engine core cost
(change over required)
Show Less Show More
Block:Hot tank cleaned, crack tested, sonic tested, main tunnel line honed, decks machined to zero deck height & true to crankshaft centre line, bored & plateau honed with torque plates, cam bearings fitted, core plugs & cam plug fitted.
Crankshaft:New Scat 9000 series crankshaft, balanced and linished.
Con-rods:New Scat I-Beam conrods, balanced.
Pistons:Hypereutectic pistons.
Rings:Hastings or Sealed Power moly rings.
Bearings:ACL, King or Clevite bearings.
Gaskets:Durapro or Fel-Pro gaskets.
Fasteners:ARP rod bolts & standard fasteners .
Core Plugs:Brass.

Cylinder Heads

Ford 347 Windsor engine

The Ford 347 windsor cylinder heads are a choice of: Brand new Aeroflow aluminium cylinder heads or reconditioned OEM heads cleaned with over size valves and pocket ported.
Cubic Inch
347 ci
Bore & Stroke
4.030″ – 3.400″
Horsepower
414 hp @ 5800rpm
Torque
418 ft/lbs @ 4500rpm
Recommended Fuel
95+ premium unleaded
$1975 OEM Head
$1898 Aeroflow Head
F347WHP1-H
Pricing does not include engine core cost
(change over required)
Show Less Show More
Heads:Choice of: Brand new Aeroflow aluminium cylinder heads or OEM heads cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures.

MACHINING SERVICES​